❤️Solution Welding Flux-Cored Rods

$12.99

quantity:
Trust badge
Description

Why Welders, Mechanics, & Household Handymen are calling Solution Welding Rods "The Strongest, Fastest, and Easiest Aluminum Fabrication or Parts Repair– no expensive equipment required.


Does The Impossible.

Makes a sound joint with slight penetration to base metal that is stronger than mild steel. Join thick or thin parts with a 45,000 lb tensile strength. 


Extreme Performance. By Design. 

Solution Welding Rods are engineered to easily flow under a very low working temperature to ensure fast application to your project with minimal distortion.


From Amateur To Pro.

Regardless of your prior experience, anyone can weld aluminum without the need for expensive equipment like welding machines. All you need is a simple propane torch and some easy welding rods.


   
 

Welding Instructions:

 

1. Thoroughly clean the area you’re about to weld by brushing the base with stainless steel brush until it becomes shiny.

2. Then evenly heat the area to be welded.

3. As you heat, rub the rod vigorously against the heated area until the rod starts flowing.

Caution: Never apply heat directly to the rod as it will crumb, and if you manage to melt the rod directly, the weld will be easily breakable. Remember, melting the rod directly is a wrong way, and makes crumby welds. 


You Talked, and We Listened.

Every aspect of Solution Welding Rods are designed for the pursuit of performance to be the world's best in class in Aluminum and other non-ferrous materials repair.

 
 

 
"I am writing to you because I used your product and was amazed immediately. I had never welded aluminum and these are photo and crude stress test on the tubes I welded. If you look close the lower square tubes bent and the weld did not even crack when I was hitting other tube with a hammer. Also has high stress on bonding point. Thanks I have save a ton of money on fixing other items and since then I am welding large items and making nice looking welds.
Thanks"
Tacho Coronado ⭐⭐⭐⭐⭐
 

 

Just a few of the many parts that can be easily repaired!

✔️Aluminum Heads
✔️Fuel Tanks 
✔️Cast Iron Heads
✔️Manifolds
✔️A/C Lines
✔️Fenders
✔️Truck Beds
✔️Transmission Cases
✔️Radiators
✔️Generators
✔️Pot Metal Parts
✔️Irrigation Pipes
✔️Refrigeration
✔️Rivets
✔️Condenser Lines
✔️Aftercoolers
✔️Industrial Parts
✔️Aluminum Molds
✔️Truck Beds
✔️Timing Covers
 ✔️Mast               
✔️Complete Fabrication  
✔️Tool Boxes
✔️Aluminum Boats
✔️Seams
✔️Towers
✔️Ladders
✔️Cavitation Plates

 

Product Benefits:

  • The easy-to-melt welding rods are high-quality special rods that are mainly used for welding / brazing aluminum and aluminum alloys. However, they can also be used for hard welding non-ferrous metals other than stainless steel.

  • Recommended for welding aluminum alloys: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and 711.0

  • Applications include cargo areas, loading ramps, docks, diamond plates, irrigation lines, engine blocks, gearboxes, etc.

  • Prepared for small repairs. For repairs that would compromise safety if they are not repaired, we recommend replacing the parts completely instead of repairing them.

 
 

Specifications:

  • Material: aluminum, magnesium

  • Melting temperature: <480 ° C (896 ° F)

  • No leakage of gases or toxins, no lead material included.

  • Excellent corrosion resistance

  • Minimize the distortion of the starting material during welding.

  • Size: 50cm x 1.6mm. ( According to the manual measurement, there may be a subtle deviation. )

Package Includes:

  • 10 pcs Welding Rods(25g)

or

  • 30 pieces * Welding Rods(75g)

or

  • 50 pieces * Welding Rods(125g)

Refund Policy

More than anything we want you to be happy with your purchase! If something doesn’t look or feel right, please contact us and we’ll make it right!

 

Also please be informed that placing an order means that you accept all the terms mentioned below.

 

---------

CANCELLATION & MODIFICATION

If you change your mind about your purchase, please send us an email to contact@excelgadgets.co, provide your order number and the modification you would like to make. We’ll confirm once the modification or cancellation has been made.

 

Your order is only eligible to be canceled and modified within the date of purchase. After that time, the order is locked for processing and no longer can be adjusted.

 

Please also be informed that a management, processing, and transaction fee (20% of your total order value) will be applied for the cancellation. 

 

---------

INCORRECT ADDRESS

For orders shipped to the wrong address due to a customer inputting the incorrect address:

- We are not responsible if your order gets delivered to the wrong address or returned to the sender (as all of the items would be destroyed right after they come back to the manufacturer's warehouse)

- Please be noted that replacements for these cases will not be free of charge so please be extremely careful when entering your shipping address.

 

---------

CHARGEBACKS & DISPUTES

Please contact us by email before opening a merchant chargeback or payment dispute, as we can generally resolve the issue before that takes place. Any chargebacks and disputes disable our ability to issue refunds or credits due to funds being frozen.

 

---------

REFUND, EXCHANGE AND RETURN

Customers have the right to request a refund/ return/ exchange within 14 days from the delivery date. Our Customer Service team will offer the best solutions for specific situations. 

 

Refund requests for used items will be refused. 

 

Please refer to our Exchange and Return Policy here to find more details about this.

 

---------

LATE OR MISSING REFUNDS (IF APPLICABLE)

After our Customer Service team confirms the refund to you, it may take 2-5 business days for the amount to be officially posted and reappear in your bank account. 

 

If you still do not receive a refund after this period, first check your bank account again. Then contact your credit card company to ask them to have an investigation.